Home > Nozzles and Spray Tips > 1/4" Male Threaded Nozzles > 15 Degree Spray Nozzle - 1/4" Male >

1/4" MPT Nozzle 6.5

1/4 MPT Pressure Washer Nozzle, Size 6.5 Orifice, 15 Degree Spray Pattern 8.708-601.0

Our Price: $6.50

Product Code: 87086010

This 8.708-601.0 Pressure Washer Nozzle is a 1/4" MPT Nozzle with a 15 Degree Spray Pattern and Size 6.5 Orifice. Also known as a 1/4 MEG Nozzle, it has a stainless steel nozzle insert that protects against nozzle wear caused by high pressure water.

As high pressure water is forced through the nozzle, the nozzle orifice wears, increasing in size allowing higher water flow and less water pressure. The stainless steel nozzle insert helps reduce this wear, thereby increasing the life of the nozzle.

  • Size 6.5 Nozzle Orifice
  • 1/4" MPT
  • 15 Degree Spray Pattern
  • 5000 PSI
  • Stainless Steel Nozzle Insert

Cross Reference Part Numbers 259131, 4-01406515, 728499, 87086010, 15065
Additional Info
  • Many pressure washers - both hot and cold - use a 1/4 inch MPT nozzle, instead of the more common quick connect nozzles. These 1/4 inch nozzles are typically found being used in dual lance wands, for ease in switching from high- to low-pressure, however are used in many other pressure washer lances and wands as well. This 1/4 inch male pipe thread nozzle is rated for use up to 5000 PSI, and its hardened stainless steel nozzle insert ensures consistent, accurate orifice size.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Nozzles and Spray Tips > 1/4" Male Threaded Nozzles > 15 Degree Spray Nozzle - 1/4" Male